The Artemis Series
A Nick Mankey Designs Limited Edition Chrono-Grip™ & Re-Entry Belt™ Series Exclusive
Just as Artemis II carries a crew farther from Earth than any mission in 50 years to prove the systems that will take us back to the Moon, this Artemis Series intends push everyday gear into new territory—tested, refined, and built for missions that demand reliability beyond the ordinary.
Hatch Sealed for Artemis Series Orders! 🔒
This was an open pre-order that took place from Oct. 1 - 7, 2025 (2359 PDT / 0659 UTC).
All orders are expected to ship no later than March 2026 (before the Artemis II mission takes off!) 👍
Thank you to everyone who climbed aboard my latest design endeavor; Your support is the rocket fuel that propels my drive for innovation. I can’t wait to build these out for each of you! 🔨
Chrono-Grip Series
Inspired by the NASA Blue Nomex Flight Suits worn by Artemis astronauts for training and public appearances, this strap pairs a 1.8mm thick Crew Blue Pro Elastic Webbing with a Gray Anodized Grade 5 Titanium Chrono-Grip Hook and technical NASA Engravings to suit— symbolizing the arduous trials that all astronauts go through before setting off into the cosmos.
P/N: NMD12200002-0XX
MODEL: CREW
CONFIG: PRO ELASTIC, CREW BLUE
LOOP FIELD, ARTEMIS PATCH
CHRONO-GRIP HDW, TITANIUM, ANODIZED/ENGRAVED
SP GRIP MODULE, BLACK/PRINTED
New for this Limited Edition Chrono-Grip Single Pass variant is the inclusion of a Duragrip™ Soft Loop Field bartacked in place just north of the end loop which captures the Hook arm. This multi-purpose mounting point serves as a place to attach mission identifier pentabs (patches) and/or the all-new Single Pass “GRIP” Module.
This mighty little unit of low-profile, double-sided Velcro serves to provide extra retention and surface protection by fixing the position of the Hook in place to prevent any unplanned, lateral-force-induced unhooking events. The soft outer layer also adds a level of scratch and snag resistance, while maintaining its outer Loop Field pentab functionality. To unlock, simply pull up on the long end to release its grasp on the Loop Field!
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All straps are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Professional Series Elastic: These Chrono-Grip straps feature my “PRO” series of reinforced elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
GRIP Module: The all-new G-Hook Retention Interface Patch has been developed specifically for use with the Integral Loop Field and is composed of a single die-cut piece of OneWrap™ Velcro™ made right here in the USA. This removable attachment serves to prevent any accidental un-hooking while undergoing EVA activities.
Special Hardware: These straps feature Anodized Grade 5 Titanium Chrono-Grip™ Hooks with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
SINGLE-PASS TO ZERO-PASS WRIST SIZE LENGTH CONVERSION (if you prefer no material beneath your watch case):
X-Small (4.50 to 5.50”) → Medium
Small (5.50 to 6.50”) → Large
Medium (6.50 to 7.50”) → X-Large
Large (7.50 to 8.50”) → XX-Large
X-Large (8.50 to 9.50”) → EVA Length
FULL SPECS:
Limited Edition Chrono-Grip™ Single Pass Strap w/ Integral Loop Field + PVC Artemis Patch (pentab)
Available in 20mm or 22mm width to cover a broad range of popular watch models.
Equipped with a Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Grade 5 Titanium G-Hook in an Anodized finish w/ thematic engravings.
Includes GRIP Module for added security in the harshest environments.
Specially-made 1.8mm thick “PRO” Military-Grade Polyester Elastic Webbing.
Twin 56-stitch Bartack construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
Chrono-Grip™ Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots.
Hot-swappable with other CG Strap Modules.
Fixed Bar friendly thanks to its single-ply webbing install method (hook removes).
Webbing passes beneath watch case for added spring-bar security.
XS, S, M, L, XL, XXL, EVA wrist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
*Smart Watch Friendly; With a larger size (2 sizes up), you can route the webbing beneath your wrist instead of the caseback (aka, zero pass).
Includes one LE Chrono-Grip™ SP Hook Strap + GRIP Module.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by the new Orion Crew Survival System suit (OCSS), this strap pairs a 1.8mm thick Flame Orange Pro Elastic Webbing with a Blue Anodized Grade 5 Titanium Chrono-Grip Hook and technical NASA Engravings to suit— embodying the bold and high contrast construction of this mission-critical gear.
P/N: NMD12200003-0XX
MODEL: OCSS
CONFIG: PRO ELASTIC, FLAME ORANGE
LOOP FIELD, ARTEMIS PATCH
CHRONO-GRIP HDW, TITANIUM, ANODIZED/ENGRAVED
SP GRIP MODULE, BLACK/PRINTED
New for this Limited Edition Chrono-Grip Single Pass variant is the inclusion of a Duragrip™ Soft Loop Field bartacked in place just north of the end loop which captures the Hook arm. This multi-purpose mounting point serves as a place to attach mission identifier pentabs (patches) and/or the all-new Single Pass “GRIP” Module.
This mighty little unit of low-profile, double-sided Velcro serves to provide extra retention and surface protection by fixing the position of the Hook in place to prevent any unplanned, lateral-force-induced unhooking events. The soft outer layer also adds a level of scratch and snag resistance, while maintaining its outer Loop Field pentab functionality. To unlock, simply pull up on the long end to release its grasp on the Loop Field!
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All straps are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Professional Series Elastic: These Chrono-Grip straps feature my “PRO” series of reinforced elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
GRIP Module: The all-new G-Hook Retention Interface Patch has been developed specifically for use with the Integral Loop Field and is composed of a single die-cut piece of OneWrap™ Velcro™ made right here in the USA. This removable attachment serves to prevent any accidental un-hooking while undergoing EVA activities.
Special Hardware: These straps feature Anodized Grade 5 Titanium Chrono-Grip™ Hooks with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
SINGLE-PASS TO ZERO-PASS WRIST SIZE LENGTH CONVERSION (if you prefer no material beneath your watch case):
X-Small (4.50 to 5.50”) → Medium
Small (5.50 to 6.50”) → Large
Medium (6.50 to 7.50”) → X-Large
Large (7.50 to 8.50”) → XX-Large
X-Large (8.50 to 9.50”) → EVA Length
FULL SPECS:
Limited Edition Chrono-Grip™ Single Pass Strap w/ Integral Loop Field + PVC Artemis Patch (pentab)
Available in 20mm or 22mm width to cover a broad range of popular watch models.
Equipped with a Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Grade 5 Titanium G-Hook in an Anodized finish w/ thematic engravings.
Includes GRIP Module for added security in the harshest environments.
Specially-made 1.8mm thick “PRO” Military-Grade Polyester Elastic Webbing.
Twin 56-stitch Bartack construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
Chrono-Grip™ Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots.
Hot-swappable with other CG Strap Modules.
Fixed Bar friendly thanks to its single-ply webbing install method (hook removes).
Webbing passes beneath watch case for added spring-bar security.
XS, S, M, L, XL, XXL, EVA wrist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
*Smart Watch Friendly; With a larger size (2 sizes up), you can route the webbing beneath your wrist instead of the caseback (aka, zero pass).
Includes one LE Chrono-Grip™ SP Hook Strap + GRIP Module.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
A tribute to the unseen frontier, this strap pairs a 1.8mm thick Stealth Black Pro Elastic Webbing with a Black Anodized Grade 5 Titanium Chrono-Grip Hook and technical NASA Engravings to suit— embracing the mystery of the Moon’s far side.
P/N: NMD12200004-0XX
MODEL: DARKSIDE
CONFIG: PRO ELASTIC, STEALTH BLACK
LOOP FIELD, ARTEMIS PATCH
CHRONO-GRIP HDW, TITANIUM, ANODIZED/ENGRAVED
SP GRIP MODULE, BLACK/PRINTED
New for this Limited Edition Chrono-Grip Single Pass variant is the inclusion of a Duragrip™ Soft Loop Field bartacked in place just north of the end loop which captures the Hook arm. This multi-purpose mounting point serves as a place to attach mission identifier pentabs (patches) and/or the all-new Single Pass “GRIP” Module.
This mighty little unit of low-profile, double-sided Velcro serves to provide extra retention and surface protection by fixing the position of the Hook in place to prevent any unplanned, lateral-force-induced unhooking events. The soft outer layer also adds a level of scratch and snag resistance, while maintaining its outer Loop Field pentab functionality. To unlock, simply pull up on the long end to release its grasp on the Loop Field!
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All straps are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Professional Series Elastic: These Chrono-Grip straps feature my “PRO” series of reinforced elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
GRIP Module: The all-new G-Hook Retention Interface Patch has been developed specifically for use with the Integral Loop Field and is composed of a single die-cut piece of OneWrap™ Velcro™ made right here in the USA. This removable attachment serves to prevent any accidental un-hooking while undergoing EVA activities.
Special Hardware: These straps feature Anodized Grade 5 Titanium Chrono-Grip™ Hooks with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
SINGLE-PASS TO ZERO-PASS WRIST SIZE LENGTH CONVERSION (if you prefer no material beneath your watch case):
X-Small (4.50 to 5.50”) → Medium
Small (5.50 to 6.50”) → Large
Medium (6.50 to 7.50”) → X-Large
Large (7.50 to 8.50”) → XX-Large
X-Large (8.50 to 9.50”) → EVA Length
FULL SPECS:
Limited Edition Chrono-Grip™ Single Pass Strap w/ Integral Loop Field + PVC Artemis Patch (pentab)
Available in 20mm or 22mm width to cover a broad range of popular watch models.
Equipped with a Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Grade 5 Titanium G-Hook in an Anodized finish w/ thematic engravings.
Includes GRIP Module for added security in the harshest environments.
Specially-made 1.8mm thick “PRO” Military-Grade Polyester Elastic Webbing.
Twin 56-stitch Bartack construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
Chrono-Grip™ Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots.
Hot-swappable with other CG Strap Modules.
Fixed Bar friendly thanks to its single-ply webbing install method (hook removes).
Webbing passes beneath watch case for added spring-bar security.
XS, S, M, L, XL, XXL, EVA wrist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
*Smart Watch Friendly; With a larger size (2 sizes up), you can route the webbing beneath your wrist instead of the caseback (aka, zero pass).
Includes one LE Chrono-Grip™ SP Hook Strap + GRIP Module.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Re-Entry Belt Series
Inspired by NASA’s Orion spacecraft, this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Lunar Gray and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Red Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300001-038
MODEL: ORION
CONFIG: POLY-PRO ELASTIC, LUNAR GRAY
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by the NASA Blue Nomex Flight Suits worn by Artemis astronauts for training and public appearances, this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Crew Blue and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Gray Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300002-038
MODEL: CREW
CONFIG: POLY-PRO ELASTIC, CREW BLUE
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by the new Orion Crew Survival System suit (OCSS), this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Flame Orange and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Blue Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300003-038
MODEL: OCSS
CONFIG: POLY-PRO ELASTIC, FLAME ORANGE
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by the quiet void of the Moon's far side, this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Stealth Black and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Black Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300004-038
MODEL: DARKSIDE
CONFIG: POLY-PRO ELASTIC, STEALTH BLACK
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by NASA’s Orion spacecraft, this single pass strap pairs a sleek 1.8mm thick Lunar Gray Pro Elastic Webbing with a Red Anodized Grade 5 Titanium Chrono-Grip Hook and technical NASA Engravings to suit— echoing hues of the lunar surface, and Orion’s protective thermal shielding with striking red accents.
P/N: NMD12200001-0XX
MODEL: ORION
CONFIG: PRO ELASTIC, LUNAR GRAY
LOOP FIELD, ARTEMIS PATCH
CHRONO-GRIP HDW, TITANIUM, ANODIZED/ENGRAVED
SP GRIP MODULE, BLACK/PRINTED
New for this Limited Edition Chrono-Grip Single Pass variant is the inclusion of a Duragrip™ Soft Loop Field bartacked in place just north of the end loop which captures the Hook arm. This multi-purpose mounting point serves as a place to attach mission identifier pentabs (patches) and/or the all-new Single Pass “GRIP” Module.
This mighty little unit of low-profile, double-sided Velcro serves to provide extra retention and surface protection by fixing the position of the Hook in place to prevent any unplanned, lateral-force-induced unhooking events. The soft outer layer also adds a level of scratch and snag resistance, while maintaining its outer Loop Field pentab functionality. To unlock, simply pull up on the long end to release its grasp on the Loop Field!
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All straps are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Professional Series Elastic: These Chrono-Grip straps feature my “PRO” series of reinforced elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
GRIP Module: The all-new G-Hook Retention Interface Patch has been developed specifically for use with the Integral Loop Field and is composed of a single die-cut piece of OneWrap™ Velcro™ made right here in the USA. This removable attachment serves to prevent any accidental un-hooking while undergoing EVA activities.
Special Hardware: These straps feature Anodized Grade 5 Titanium Chrono-Grip™ Hooks with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
SINGLE-PASS TO ZERO-PASS WRIST SIZE LENGTH CONVERSION (if you prefer no material beneath your watch case):
X-Small (4.50 to 5.50”) → Medium
Small (5.50 to 6.50”) → Large
Medium (6.50 to 7.50”) → X-Large
Large (7.50 to 8.50”) → XX-Large
X-Large (8.50 to 9.50”) → EVA Length
FULL SPECS:
Limited Edition Chrono-Grip™ Single Pass Strapw/ Integral Loop Field + PVC Artemis Patch (pentab)
Available in 20mm or 22mm width to cover a broad range of popular watch models.
Equipped with a Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Grade 5 Titanium G-Hook in an Anodized finish w/ thematic engravings.
Includes GRIP Module for added security in the harshest environments.
Specially-made 1.8mm thick “PRO” Military-Grade Polyester Elastic Webbing.
Twin 56-stitch Bartack construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
Chrono-Grip™ Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots.
Hot-swappable with other CG Strap Modules.
Fixed Bar friendly thanks to its single-ply webbing install method (hook removes).
Webbing passes beneath watch case for added spring-bar security.
XS, S, M, L, XL, XXL, EVA wrist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
*Smart Watch Friendly; With a larger size (2 sizes up), you can route the webbing beneath your wrist instead of the caseback (aka, zero pass).
Includes one LE Chrono-Grip™ SP Hook Strap + GRIP Module.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---