- Shop
- "Darkside" Re-Entry Belt™ - Official NASA Artemis Series - Limited Edition Elastic Waist Belt - NMD12300004-038
"Darkside" Re-Entry Belt™ - Official NASA Artemis Series - Limited Edition Elastic Waist Belt - NMD12300004-038


"Darkside" Re-Entry Belt™ - Official NASA Artemis Series - Limited Edition Elastic Waist Belt - NMD12300004-038
Inspired by the quiet void of the Moon's far side, this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Stealth Black and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Black Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300004-038
MODEL: DARKSIDE
CONFIG: POLY-PRO ELASTIC, STEALTH BLACK
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Inspired by the quiet void of the Moon's far side, this all-new waist belt utilizes a 2.8mm thick, 38mm wide (1.50 inch) extra heavy-duty, crush-resistant polypropylene elastic webbing in Stealth Black and a custom machined, low-profile, light-weight, ultra strong, Aerospace Grade 7075 Alumimum G-hook buckle with a Black Type III MIL-A-8625F Hard Anodized surface finish for added durability.
P/N: NMD12300004-038
MODEL: DARKSIDE
CONFIG: POLY-PRO ELASTIC, STEALTH BLACK
LOOP FIELD, ARTEMIS PATCH
G-HOOK BUCKLE HDW, 7075 ALU, TYPE III HARD ANODIZED/ENGRAVED
Like its strapping counterpart, these buckles are entirely removable from the elastic webbing, and infinitely adjustable, thanks to the same Grip-Lock Strap Slot system carried over from the Chrono-Grip™ hardware design. To install, simply slide the heat treated webbing tip into the bottom strap slot from the underside, and then back down the top strap slot to lock it in place. Tighten by pulling the webbing through, and vice versa to loosen.
This Limited Edition belt also includes a matching Duragrip™ Soft Loop Field that is bartacked and box stitched in place north of the end loop which captures the Hook arm. Perfect for program identifier patches (such as the included Artemis patch) or other utility items that suit your mission.
Note: These are late-stage (95%) prototypes that may appear slightly different once in production- such as minor color variances, improved graphic quality, hardware refinements, or PVC patch details, etc.
OVERVIEW:
Limited Edition NASA/Artemis Program Graphics: Officially Approved by NASA’s Public Relations Department, each belt features the use of authentic NASA emblems and colors to meet identification regulations.
Custom PVC Artemis Patch: All belts are supplied with a custom-cast, indestructible, lume-infused Artemis Program identification PVC Patch made right here in the USA- sized to fit on the integral loop field!
Poly-Pro Series Elastic: These Re-Entry Belts feature an all-new Polypropylene series of reinforced elastics that have been woven for stretchy comfort, while remaining crush-resistant and up for anything.
Special Hardware: These straps feature an all-new, patent pending, Aerospace Grade 7075 High Strength Aluminum G-hook and a Type III MIL-A-8625F Hard Anodized surface finish for added durability, with limited edition NASA-inspired engravings applied in-house. Thoughtfully designed to provide astronauts with at-a-glance instructions for use, and passive webbing containment indications.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are unlimited during the pre-order window of October 1 - 7, 2025.
Order delivery dates will not exceed March of 2026.
WAIST SIZE TO BELT SIZE CONVERSION CHART (pant size):
30-32” Waist Size → X-Small
34-36” Waist Size → Small
38-42” Waist Size → Medium
44-46” Waist Size → Large
48-50” Waist Size → X-Large
FULL SPECS:
Limited Edition Re-Entry Belt™ w/ Integral Loop Field + PVC Artemis Patch (pentab)
Equipped with a Custom, Super Durable, Low-Profile, 7075 Grade Aluminum G-Hook in a Hard Anodized finish w/ thematic engravings.
Specially-made 2.8mm thick, 1.50” (38mm) wide “Poly-Pro” Military-Grade Polypropylene Elastic Webbing.
Twin 94-stitch Bartack + box stitch construction with Extra Heavy Weight 100% Bonded Nylon UV-Resistant Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable (gentle wash cold after you remove the g-hook, air dry).
Conforms to waist shape and stretches with your natural movements.
Re-Entry Hook is entirely removable, and allows for complete size adjustments due to its twin grip lock strap slots. Tightens as pulled.
Passive Capture Geometry to maintain the webbing loop.
Hot-swappable with other Belt Modules.
Webbing passes beneath the buckle and continues behind outer layer. No keepers!
XS, S, M, L, XL, waist sizes are offered to achieve a broad range of fitments.
Webbing is trimmable by end user for a more dialed-in fitment.
Includes one LE Re-Entry Belt™ + Artemis PVC Patch.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---