- Shop
- "ACES MK2" Hook Strap™ - Official NASA Series - Limited Edition Elastic Watch Band - NMD12100006-0XX
"ACES MK2" Hook Strap™ - Official NASA Series - Limited Edition Elastic Watch Band - NMD12100006-0XX
"ACES MK2" Hook Strap™ - Official NASA Series - Limited Edition Elastic Watch Band - NMD12100006-0XX
Supreme Comfort, Gone Space Age. Introducing: The Limited Edition “ACES MK2” Hook Strap™. Straight from the edge of our atmosphere, this striking series of watch bands are made from an entirely new weave of Military-Grade Polyester Elastic Webbing that greatly enhances durability and features striking NASA Approved graphic emblems, all with my latest custom machined 316 Stainless Steel “G-Hook” hardware in a striking Red & Blue Finish.
P/N: NMD12100006-0XX
MODEL: ACES MK2
CONFIG: "PRO" ELASTIC, ORANGE
HD PRINT, NASA "WORM", BLACK
HARDWARE, FBV3, PIGMENTED
TETHER MODULE, ORANGE
"That the suit could withstand forces sufficient to disintegrate an airplane and shred heavy nylon seat belts, yet leave me with only a few bruises and minor whiplash was impressive. I truly appreciated having my own little escape capsule." — Bill Weaver, after surviving an involuntary SR-71 ejection at Mach 3 and 78,000 ft.
This limited edition Hook Strap was built to encapsulate the venerable Advanced Crew Escape Suit (ACES). Also known as the "pumpkin suit", this unapologetically orange full pressure suit is an evolution of the same pressure suits worn by high altitude pilots of the 1960s, Gemini astronauts, and the Launch Entry Suits worn by NASA astronauts starting with the STS-26 shuttle flight in 1988.
The International Orange "Professional" series of elastic was selected for its enhanced durability, high-visibility properties, and to evoke the distinctly utilitarian characteristics of the ACES suits worn by NASA astronauts during the ascent and entry stages of their space flight.
OVERVIEW:
Limited Edition NASA Emblem Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
HD Printing: All graphics are applied in house by a specialized process to provide unsurpassed definition, vibrance, and resistance to the harshest conditions. This cutting edge “HD Print” technology comes standard on all NASA Series straps.
Professional Series Elastic: These are the first straps to feature my “PRO” series of elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
Tether Module: The all-new "Tether Module" is composed of the same "Pro" Elastic and custom 2mm dia. wire-form aluminum alloy loops to prevent any contact blemishing. This attachment serves to retain one's timepiece in the event of a spring bar failure. It can be "toggled" on or off, and is entirely removable if so desired.
Special Hardware: Powder Coated Red & Blue Fixed Bar Compatible hardware have been bartacked to opposing ends of the strap for added indestructibility. They were incorporated into each NASA Series strap to emulate the striking anodized intake and exhaust valves found on EVA suits and to reinforce NASA's color scheme.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are limited to just 40 quantity per size/model.
Orders Estimated to Ship Throughout October-November 2022.
FULL SPECS:
Limited Edition, Double-Sided NASA ”Worm” and Agency Text + USA Flag HD Print Emblems.
Utilizes my all-new “HD” Printed Artwork with unsurpassed definition, vibrance, and scratch resistance.
Equipped with Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Marine Grade 316 Stainless Steel Hardware in a Powder Coated Red & Blue finish.
Includes Tether Module for added security in the harshest environments.
Specially-made 1.5mm thick “PRO” Military-Grade Polyester Elastic Webbing.
56-stitch Bartack construction with Extra Heavy Weight 100% Polyester Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
5” - 9” wrist sizes are offered to achieve a perfectly tailored fit.
Wears flat on the wrist when Tether is removed or worn beneath wrist.
Smart Watch Friendly; Allows for full use of any built-in fitness sensors when Tether is removed or worn beneath wrist.
Includes one LE Hook Strap + Tether.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
Supreme Comfort, Gone Space Age. Introducing: The Limited Edition “ACES MK2” Hook Strap™. Straight from the edge of our atmosphere, this striking series of watch bands are made from an entirely new weave of Military-Grade Polyester Elastic Webbing that greatly enhances durability and features striking NASA Approved graphic emblems, all with my latest custom machined 316 Stainless Steel “G-Hook” hardware in a striking Red & Blue Finish.
P/N: NMD12100006-0XX
MODEL: ACES MK2
CONFIG: "PRO" ELASTIC, ORANGE
HD PRINT, NASA "WORM", BLACK
HARDWARE, FBV3, PIGMENTED
TETHER MODULE, ORANGE
"That the suit could withstand forces sufficient to disintegrate an airplane and shred heavy nylon seat belts, yet leave me with only a few bruises and minor whiplash was impressive. I truly appreciated having my own little escape capsule." — Bill Weaver, after surviving an involuntary SR-71 ejection at Mach 3 and 78,000 ft.
This limited edition Hook Strap was built to encapsulate the venerable Advanced Crew Escape Suit (ACES). Also known as the "pumpkin suit", this unapologetically orange full pressure suit is an evolution of the same pressure suits worn by high altitude pilots of the 1960s, Gemini astronauts, and the Launch Entry Suits worn by NASA astronauts starting with the STS-26 shuttle flight in 1988.
The International Orange "Professional" series of elastic was selected for its enhanced durability, high-visibility properties, and to evoke the distinctly utilitarian characteristics of the ACES suits worn by NASA astronauts during the ascent and entry stages of their space flight.
OVERVIEW:
Limited Edition NASA Emblem Graphics: Officially Approved by NASA’s Public Relations Department, each strap features the use of authentic NASA emblems and colors to meet identification regulations.
HD Printing: All graphics are applied in house by a specialized process to provide unsurpassed definition, vibrance, and resistance to the harshest conditions. This cutting edge “HD Print” technology comes standard on all NASA Series straps.
Professional Series Elastic: These are the first straps to feature my “PRO” series of elastics that have been woven from scratch to perform in the deepest depths and the highest heights.
Tether Module: The all-new "Tether Module" is composed of the same "Pro" Elastic and custom 2mm dia. wire-form aluminum alloy loops to prevent any contact blemishing. This attachment serves to retain one's timepiece in the event of a spring bar failure. It can be "toggled" on or off, and is entirely removable if so desired.
Special Hardware: Powder Coated Red & Blue Fixed Bar Compatible hardware have been bartacked to opposing ends of the strap for added indestructibility. They were incorporated into each NASA Series strap to emulate the striking anodized intake and exhaust valves found on EVA suits and to reinforce NASA's color scheme.
Legendary Packaging: Each order ships with completely redesigned limited edition packaging, a collector's card, plus a few extra special goodies. 🚀👨🚀
Quantities are limited to just 40 quantity per size/model.
Orders Estimated to Ship Throughout October-November 2022.
FULL SPECS:
Limited Edition, Double-Sided NASA ”Worm” and Agency Text + USA Flag HD Print Emblems.
Utilizes my all-new “HD” Printed Artwork with unsurpassed definition, vibrance, and scratch resistance.
Equipped with Custom, Fixed Bar Compatible, Super Durable, Low-Profile, Marine Grade 316 Stainless Steel Hardware in a Powder Coated Red & Blue finish.
Includes Tether Module for added security in the harshest environments.
Specially-made 1.5mm thick “PRO” Military-Grade Polyester Elastic Webbing.
56-stitch Bartack construction with Extra Heavy Weight 100% Polyester Thread.
Water resistant. Shock resistant. Low-Profile. Fully Machine Washable.
Conforms to wrist shape and stretches with your natural movements.
5” - 9” wrist sizes are offered to achieve a perfectly tailored fit.
Wears flat on the wrist when Tether is removed or worn beneath wrist.
Smart Watch Friendly; Allows for full use of any built-in fitness sensors when Tether is removed or worn beneath wrist.
Includes one LE Hook Strap + Tether.
Handmade to order right here in CA, USA, EARTH 🌎
Satisfaction Guaranteed 👍
(PATENT PENDING)
**Watch not included. Sorry.
Proudly made by hand right here in California, USA.
---
